Harvia Cilindro Pro electric heater PC100E/135E 10/13,2 kW

Harvia Cilindro Pro electric heater PC100E/135E for solid class

Cilindro Pro 100E/135E is a great source of heat for family saunas, but commercial saunas, hotels and housing associations, for example, benefit from the heaters features. The massive amount of stone provides an enjoyable sauna experience.

The 130 cm high heaters contain 140 kg of stones and sturdy resistors designed to withstand long periods of use. Together, these ensure that there is enough steam for even the largest sauna groups.

The Cilindro’s outer casing is made of stainless steel. The heat produced by the heater can be adjusted from soft to more intense by aiming the heat throw either at the side of the stove or directly at the stone pillar.

Cilindro Pro 100E/135E stoves are controlled by a separate control panel.

By changing the wiring, a total of two power versions of the heater can be obtained.

Cilindro Pro 100E/135E heaters can be switched to either 10 or 13.2 kW.

The heaters can be equipped with the freely orientable HPC5 protective wall, which allows the heater to be installed closer to a wall or a corner of the sauna. The cover plate also protects wall surfaces from dirt caused by water and stone dust.

Power 10 / 13,2 kW

Dimensions 355 x 355 x 1300

Sauna size 9-20 m3

Stone quantity 140 kg

Protection distances (mm): front 100, side walls 100, ceiling 550

NEEDS TO BE EQUIPPED WITH A SEPARATE CONTROL PANEL E.G. XENIO OR C150